7. MODIFYING MEASUREMENT CONDITIONS
No. 99MBB122A
7-9
■ Operating procedure (Refer to “■ Accessing the Measurement Conditions screen” in Section 7.1.)
Home screen to Main Menu
1 Select “Filter” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
2 Select a profile filter compatible with the target surface with the [ ↑ ] [ ↓ ]
keys, and press the [Enter/Menu] key.
The selected filter is displayed on the Measurement Conditions
screen.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• When the Measurement Conditions screen has been
accessed using the shortcut [Red] key, pressing the
[Esc/Guide] key once returns you to the Home screen.
Filter Setup screen
Measurement Conditions screen
Measurement Conditions screen
To Next Page
Loading...
