No. 99MBB122A
6-28
4 Press the [Enter/Menu] key to accept entered values.
TIP
• To cancel settings input, press the [Esc/Guide] key instead
of the [Enter/Menu] key.
The set values are enabled.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
A message is displayed when cumulative distance exceeds the
limit for the first time after measurement has been completed.
After the message disappears, the alarm indicator of the stylus
mark is displayed to indicate that cumulative distance has
exceeded the threshold.
TIP
• To set the cumulative distance to 0, press the “ClearDis”
([Blue] key) on the Stylus Alarm screen.
Home screen
Home screen
Stylus Alarm screen
To Next Page
Loading...
