7. MODIFYING MEASUREMENT CONDITIONS
No. 99MBB122A
7-15
■ Operating procedure (Refer to “■ Accessing the Measurement Conditions screen”
in Section 7.1.)
Home screen to Main Menu
1 Select “N” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
2 Select a number of sampling lengths compatible with the target surface
with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
The selected number of sampling lengths is displayed on the
Measurement Conditions screen.
TIP
• When “Opt Length” is set, the evaluation length can be set
to an arbitrary length. For more information on setting the
arbitrary length, refer to 7.8, “Setting the Evaluation Length
to an Arbitrary Length”.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• When the Measurement Conditions screen has been
accessed using the shortcut [Red] key, pressing the
[Esc/Guide] key once returns you to the Home screen.
Measurement Conditions screen
Number of Sampling
Lengths Setup screen
Measurement Conditions screen
To Next Page
Loading...
