7. MODIFYING MEASUREMENT CONDITIONS
No. 99MBB122A
7-21
■ Operating procedure (Refer to “■ Accessing the Measurement Conditions screen” in Section 7.1.)
Home screen to Main Menu
1 Select “Pre/Post” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
2 Select “ON” or “OFF” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
The selected pre-travel/post-travel setting is displayed on the
Measurement Conditions screen.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• When the Measurement Conditions screen has been
accessed using the shortcut [Red] key, pressing the
[Esc/Guide] key once returns you to the Home screen.
Measurement Conditions screen
Pre-travel/Post-travel Setup screen
Measurement Conditions screen
To Next Page
Loading...
