No. 99MBB122A
7-26
■ Operating procedure (Refer to “■ Accessing the Measurement Conditions screen” in Section 7.1.)
Home screen to Main Menu
1 After a roughness measurement, measurement conditions can be
modified while the calculation result is being displayed.
2 Press the “Re-Calc.” ([Blue] key) on the Measurement Conditions
screen.
A message indicating the progress of recalculation is displayed.
After recalculation has been completed, the Home screen is
displayed. The recalculated measurement data is displayed on the
Home screen.
Measurement Conditions screen
Home screen
To Next Page
Loading...
