8. MODIFYING PARAMETERS
No. 99MBB122A
8-7
■ Operating procedure (selecting all parameters at once) (Refer to “■ Accessing the Submenu screen” in
Section 8.1.)
Home screen to Main Menu
1 Check that the roughness standard and evaluation profile are selected
for the parameters to be customized.
When the roughness standard or evaluation profile differs, refer to 7.2,
“Modifying the Roughness Standard” or 7.3, “Modifying the Evaluation
Profile”, and change the roughness standard or evaluation profile
accordingly.
2 Press the “Submenu” ([Red] key).
3 Select “Set All” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
All the parameter's names turn red, and the background turns light
blue.
All items are displayed as being set.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
Home screen
Parameter Setup screen
Submenu screen
Parameter Setup screen
To Next Page
Loading...
