No. 99MBB122A
8-16
4 Select the measurement type for the height of the count level, and press
the [Enter/Menu] key.
The background of the selected measurement type turns blue.
The measurement type for the height of the count level is switched
to the predetermined type.
5 Set the height of the count level.
a Select “Count Level” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
b Input the height of the count level.
The input range is as follows:
0.0 to 99.9 %
0.0 to 999.9m (9999.9 in)
TIP
• The value is set to 0 when the “AC” ([Blue] key) is pressed.
• For information about numeric value entry, refer to 2.5,
“Entering Numeric Values/Characters”.
Sm/Pc/Ppi/Rc Setup screen
Sm/Pc/Ppi/Rc Setup screen
Sm/Pc/Ppi/Rc Setup screen
Count Level Setup screen
To Next Page
Loading...
