9. MEASUREMENT RESULTS (LOAD/SAVE/DELET/RENAME)
No. 99MBB122A
9-3
3 Insert the memory card, with the pin assignment side facing up, into the slot as far as
possible.
Inserting the memory card
4 Fit the rear cover to the hollow of the rear of the display unit in the direction indicated
by the arrow (1).
5 Push the rear cover in the direction indicated by the arrow (2) and attach it.
Attaching the rear cover
■ Removing the memory card
1 Place your nail on the hollow provided on the rear cover, and push the rear cover in
the direction indicated by the arrow (1).
2 Pull the rear cover in the direction indicated by the arrow (2) and remove it.
Detaching the rear cover
㧔1㧕
㧔2㧕
Rear cover
㧔1㧕
㧔2㧕
Rear cover
IMPORTANT
Insert the memory card with the
pin assignment side facing up.
To Next Page
Loading...
