No. 99MBB122A
2-2
■ Functions of operation keys
[POWER/DATA] key
Used to turn the power of the SJ-210 on.
Used to output data when DP-1VR or a printer is connected to the SJ-210.
It is also used to store the displayed contents on the monitor in the memory card i the
BMP file format.
[START/STOP] key
Used to start or stop measurements.
[PAGE] key
Used to display measurement results for the other parameters, evaluation profiles,
graphs, lists of conditions.
[Blue] key
Used to return to the Home screen, delete numeric values, or execute functions
displayed on the monitor.
[Red] key
Used to display the sub menu, switch the available character type for entering, or
executes functions displayed on the monitor.
Cursor key ([ ↑ ], [ ↓ ], [ ← ], [ → ]㧕
Used to select desired items, switch the page, enter numeric values/characters.
[Esc/Guide] key
Used to return to the previous screen. This key also functions to turn the power of the
SJ-210 off.
[Enter/Menu] key
Used to make the setup items take effects.
To Next Page
Loading...
