14. INSTALLING THE SJ-210 WITH OPTIONAL ACCESSORIES
No. 99MBB122A
14-7
■ Adapter for magnetic stand
Used to secure the drive/detector unit to the magnetic stand.
This adapter is useful when there is insufficient space for the SJ-210 (or the drive/detector
unit) or when the drive/detector unit cannot be held by hand.
Dimensions and application example
Dimensions and application example of the adapter for magnetic stand
Attaching the adapter for magnetic stand
1 Attach the adapter for magnetic stand to the rear of the SJ-210
drive/detector unit.
2 Using the supplied Allen wrench, tighten the two screws shown in the
following figure.
Attaching the adapter for magnetic stand
Magnetic stand
Adapter for magnetic stand
Drive/detector unit
A: 8 mm (0.315 in)/ 9.5 mm (3/8in)
Adapter for magnetic stand
No. 12AAA221 (A: 8 mm (0.315 in))
No. 12AAA220 (A: 9.5 mm (3/8 in))
Screw
Drive
Detector
To Next Page
Loading...
