Mitutoyo SJ-210 - Page 314

14. INSTALLING THE SJ-210 WITH OPTIONAL ACCESSORIES
No. 99MBB122A
14-9
 Attaching the adapter for the height gage
1 Attach the adapter to the rear of the SJ-210 drive unit.
2 Using the supplied Allen wrench, tighten the two screws shown in the
following figure.
Attaching the adapter for the height gage
Adapter for height gage
No.12AAA222
(A x B=9 x 9 mm)
No.12AAA233
(A x B=1/4 x 1/2 in)
Screw
Drive
Detector