2. OPERATION KEYS AND DISPLAY OF THE SJ-210
No. 99MBB122A
2-5
■ Displaying the remaining battery power
The icon for displaying the remaining battery power appears on the display of the display
unit. While the battery is being charged, an icon indicating that charging is taking place is
displayed.
During the AC adapter powered operation, the battery is automatically charged according
to the power consumption.
100 to 80% 80 to 60% 60 to 40% 40 to 20% 20 to 0%
Charging in
progress
IMPORTANT
• Observe the following when the SJ-210 is not powered with the AC adapter.
• When the remaining battery power falls between 20% and 40%, connect the AC
adapter as soon as possible.
• When the remaining battery power approaches 0%, connect the AC adapter
immediately. When SJ-210 is left with no battery charge, measurement results
might be erased.
TIP
• For more information about the charging procedure, refer to 3.4.1, “Recharging the
built-in battery”.
Indication of remaining voltage
Indication condition
of charge
The icon for displaying the
remaining battery power
The power is off after
this icon flashes 10
seconds.
The display when the
built-in battery switch is
OFF.
To Next Page
Loading...
