No. 99MBB122A
15-10
8 Fix the cable into the cable support plates.
Fix the cable with the hook (1) at the built-in battery side, and the hook (2) at other
side.
IMPORTANT
• When fixing the cable of the built-in battery pack, do not use any pointed tools such as
driver. Otherwise, the coating of cable might be torn and then the built-in battery might
be shorted.
• When fixing the cable of the built-in battery pack to the cable support plate, make sure
to fix the part that is covered with shrinkable tube.
• Never remove the cable support plate. Otherwise, the spring of the drive/detector unit
retaining pin comes out.
Fixing the cable
Cable support
plate
㧔㧕
㧔㧕
Shrinkable tube
To Next Page
Loading...
