17. PRODUCT SPECIFICATIONS
No. 99MBB122A
17-15
● Write command
Write command basic configuration
Header
(2 bytes)
Sub-field
(3 bytes) Data
*1
EM
(1 byte)
WR * * * * * * * - CR
*1: Data section can be omitted.
Write command
Sub-field Data Meaning
CON * * * * * * Modification of the measurement
conditions or evaluating
conditions
CON command
Command to modify measurement/evaluating conditions
Data section Bytes: number of bytes from the tip of data
Bytes Settings Description
0
* (standard) 0: JIS1982, 1: JIS1994, 2: JIS2001, 3: ISO1997,
4: ANSI, 5: VDA, 6: Free
1 * (Profile) 0: P, 1: R, 2: DF, 3: R-MOTIF
2
* (Cutoff length λc) 0: 0.08, 1: 0.25, 2: 0.8, 3: 2.5
λs is set according to λc.
3 * * (Number of sampling lengths) 00 - 10
5
* *. * * (Arbitrary evaluation length) 0.10 - 16.00 (When the number of sampling length is 00)
Unit [mm]
10
* (Upper limit of motif length A) 1: 0.02, 2: 0.1, 3: 0.5
Upper limit of motif length B is set according to A.
11
㧖㧔Filters㧕 0:2CR75ޔ1:PC75ޔ2:GAUSSޔ3:None
Response (normal)
Header EM
OK CR
Response (abnormal)
Header Sub-field EM Meaning
NG * * *, * * CR * * * : Refer to “● Error codes”.
* *
㧦Bytes with error code
To Next Page
Loading...
