17. PRODUCT SPECIFICATIONS
No. 99MBB122A
17-21
● Error codes
Error No. Error description Remedies
003 Origin limit cannot be detected within a given period of time. Checking the drive unit
004 Retraction limit cannot be detected within a given period of time. Checking the drive unit
005
When detected at the origin limit even after an amount of time has
passed.
Checking the drive unit
006
When detected at the retraction limit even after an amount of time has
passed.
Checking the drive unit
007
Detector over-range Checking the measuring
point
011 Request while performing operation
012 Control timeout
013 Buffer overflow
014 Flash memory erase error
015 Flash memory write error
016 Program error
017 System error
018 Measurement start position error Reset the setup
019 Incorrect settings error
030 Illegal command
031 Command format error
032 Command value error
033 Processing command
101 No calculation results
102 Calculated results are out of the range
103 Aborts the measurement due to calculation results over-range
110
Cannot be calculated due to insufficient number of peaks and valleys
㧔Less Peak Valley㧕
111 Rz: Less Peak Valley
112 No sufficient data
113 Range error
114 No profile element
115 Cannot be calculated for the BAC/ADC due to insufficient peaks and
To Next Page
Loading...
