Mitutoyo SJ-210 - Page 375

No. 99MBB122A
18-18
 When GAUSS filter is selected
Traversal length (When GAUSS filter is selected)
 When the PC75 filter is selected
Traversal length (When PC75 filter is selected)
 When measuring with the unfiltered profile (P)
Traversal length (when measuring with the unfiltered profile (P))
TIP
• When measuring the roughness profile with pre-travel and post-travel lengths is
disabled, the calculation is performed with the pre-travel and post-travel data folded
(nulled).
Approach travel
2.5 mm (0.098 in)
Evaluation length
ℓ
n
Traversal length
Normal measuring position
Origin
Escape range
2 mm (0.079 in)
Pre-travel
ℓ/2
Post-travel
ℓ/2
Approach travel
2.5 mm (0.098 in)
Evaluation length
ℓ
n
Traversal length
Normal measuring position
Origin
Escape range
2 mm (0.079 in)
Pre-travel
ℓ
Post-travel
ℓ
Approach travel
2.5 mm (0.098 in)
Evaluation length
ℓ
n
Traversal length
Normal measuring position
Origin
Escape range
2 mm (0.079 in)