No. 99MBB122A
3-10
■ Plugging in and unplugging the connection cable
Plug in and unplug the connection cable as shown below:
Connection cable
Connecting the drive/detector unit connection plug
Check the orientation of the mating connector and plug, then connect the connector
and the plug while firmly holding section C.
Disconnecting the drive/detector unit connection plug
Pull out the plug while firmly holding section C.
Connecting the connection cable plug
Check the orientation of the mating connector and plug, then insert the plug into the
drive unit connector while firmly holding section B.
Disconnecting the connection cable plug
While holding the section A, slide A towards B, then pull out the plug.
Connector
Drive/detector unit
connection plug
Drive/detector unit
Connection cable
Plug
A
B
C
View in the
connector direction
Connector
View in the connector
direction
View in the plug
direction
View in the connector
direction
To Next Page
Loading...
