Hardware
161
(4) Use SMASH-CLP
Refer to the chapter which describe SMASH-CLP in details.
IMPORTANT:
●Don't update and reboot BIOS/Management Firmware until the OS
boot is finished after starting power on.
●When using A1080a-D, don’t update and reboot BIOS/Managemnet
Firmware until the OS boot is finished after starting power on even if
the OS boot is being executed on the other server.
If OS boot is finished, then the “Server Health” on Web console/
Monitoring/Summary will be “OS running/EFI Manager Booted”.
To Next Page
Loading...
