428
1.10 Service Processor
Service Processor is displayed by selecting “Service Processor” from the menu on the left side
of the screen.
Management Firmware can be rebooted(reset) and all the hardware logs on the MGM on which
System Web console operates can be collected in Service Processor.
(1) Clicking “SP Reset” enables to reset all the MGMs configuring the system.
(1)
(2)
(3)
(4)
IMPORTANT:
NEC unrecommends the "SP Reset" operation to you while the
DC power is on because the application of the OS may not
work well.
In A1080a-D model, if another server is starting up, don’t
execute “SP Reset” operation until the status of another server
will be “OS Running or EFI Manager Booted”.
Don't execute “SP Reset” operation until the status of this
server will reach to “Stopped” after power-off.
In A1080a-D model, if another server is stopping, don’t execute
“SP reset” operation until the status of another server will
reach to “Stopped”.
To Next Page
Loading...
