NEC Express 5800 - Restore Defaults Menu

Hardware
250
Server Menu
Restore Defaults Menu
When LCD Guard Mode is set to “Disable,” the screen moves to Server Menu, Restore Defaults
Menu by selecting and executing “Restore SVRx >” in the Server Menu status.
(1) Server Number : Server Number [1] or [2] is displayed.
 Select “Up” or “Down” button to move within Restore Defaults Menu.
 The leftmost “ ” indicates the currently selected item.
 Press “OK” button to execute the menu item.
 Select and execute “Return” to return to Server Menu.
 When selecting and executing “Reset Param BIOS,” BIOS setting for the applicable Server
can be restored to the factory default.
 When executing “Reset Param BIOS,” Menu screen of the below image is displayed.
 When selecting “Execute” and pressing “OK” button, restore defaults is executed.
 When selecting “Return” and pressing “OK” button, restore defaults is not executed.
R
e s
et
P a
ra
m B
IO
S
E
x e c
ut
e
R
e t u
rn
R
e s
t o
r e
SV
R1
R
e s e
t
P a r
am
B
IOS
>
R
e t u
r n
(1)
IMPORTANT:
Don’t use this command,”Restore Default Memu”, unless the
maintenance person requests.