469
2.8 Save or Restore
Save or Restore is displayed by selecting “Save or Restore” from the menu on the left side of
the screen.
Save or restore of SG information related to the server is performed in Save or Restore.
(1) Selecting “Save Settings” enables to save SG information.
SG information is the setting data for the management firmware and the partition. Since
this is saved to non-volatile area in MGM, this will not be erased.
The saved object as SG information is same as the restore object. The restore object is
listed in next page.
(2) Selecting “Restore Settings” enables to set SG information in the restore file inside the
management PC.
(3) Clicking “Submit” enables to execute (1) or (2).
(1)
(2)
(3)
IMPORTANT:
The reference button may not be displayed if the management
PC OS is Linux. In such a case, please move mouse cursor to
the text box at first. if you single-click or double-click the right
button at there, the file dialog box will pop up.
This operation is executable if the server power status is Off or
server status is ”Stopped”/”Handling Fault”/”Power On Failed”.
To Next Page
Loading...
