514
3.2.2 Mode Settings
Mode Settings is displayed by selecting “Settings” and clicking “Mode Settings” of the menu
on the left side of the screen.
Various operation settings related to resource can be set in Mode Settings.
(1) Clicking “Submit” enables to set the information of (3).
(2) Clicking “Default Select” enables to restore the operation mode status to the default
status.
(3) Configuration
Display/set setting information related to configuration.
Clear SG information of Management Firmware
15
15
The setting items which will be reset to the default value by this operation, are same as the restored items at restore
operation. As for the restore items, please refer section 2.8.
(3)
(1)
(2)
To Next Page
Loading...
