Hardware
229
System Menu
LCD Guard Mode Set Password Menu
When selecting and executing “Enable >” in the LCD Guard Mode Enable/Disable Menu
status, the screen moves to Set Password Menu.
Select “Up” or “Down” button to change the numbers on the cursor one by one in the range
from 0 to 9. Default value is set to All 0.
Select “Left” or “Right” button to move the cursor from side to side.
When pressing “OK,” LGD Guard Mode is set to Enable by the entered value as a password.
S
e
t
Pa
s s w
or
d
0
0 0 0
To Next Page
Loading...
