391
1.4.1 Time And Date
Time And Date is displayed by selecting “Settings” and clicking “Time And Date” of the menu
on the left side of the screen. Time and date of Service Processor is set in Time And Date.
Manual setting, setting adjusted to the time and date of management PC, and NTP server setting
can be performed.
(1) Selecting “Manual Setting” enables to set time and date manually or from the time(local
time) of management PC.
(1)-1 Selecting “Set the time manually” enables to set time and date manually.
Select selectable date for each of year, month, and date.
Enter settable time for hour(HH), minute(MM), and second(SS) from the keyboard.
Settable Range: HH:0-23, MM:0-59, SS:0-59
(1)-2 Selecting “Use the time reported by the browser” enables to set the time obtained from
management PC as localtime.
(1)-3 Set UTC offset value (from -24 to +24, and operator designated value (-24:00 to +24:00,
and custom setting)) in “Universal Time(UTC)Offset.”
If “Custom” in the list of the select box is selected, the input box for the custom setting will
appear on this page. Then, an operator can designate the values from -24:00 to +24:00.
e.g.:
(1)
(2)
(3)
(4)
(1)-1
(1)-2
(1)-3
(3)-1
(3)-2
To Next Page
Loading...
