41
Features of the Server
High Performance
● Intel® Xeon® Processor E7-8800/4800 Product Family
● High-speed memory access (DDR3L 1066)
● High-speed 1000BASE-T/100BASE-TX/10BASE-T
interface
● High-speed disk access
(Supports SAS(Serial Attached SCSI))
High Reliability
● Memory monitoring feature (Error correction/
Error notification)
● Memory/Processor monitoring feature
(Degradation)
● Memory mirroring feature
● Memory sparing feature
● Thermal sensor
● Error notification
● Internal Fan revolution monitoring feature
● Internal voltage monitoring feature
● Redundant power supplies (Supports Hot-swap)
● RAID system
● Auto rebuild feature
(Supports Hot-swap)
● BIOS pass-word feature
● Redundant Fan units (Supports Hot-swap)
Expandability
● Up to 8 processors/80 cores
● Large memory up to 1TB (A1080a-S/A1080a-D/A1040a)/
Up to 2TB (A1080a-E)
● Up to 14 I/O slots (A1080a-E)
● Up to 12 hard disk drives (Supports Hot-swap)
● 3 network ports available (One of them is use for server
management)
● One-touch installation for additional HDD or power supply
unit.
● Supports USB2.0
Management Utilities
● Remote monitoring feature
(EXPRESSSCOPE® Engine SP 2)
● NEC ESMPRO (Management software)
● Universal RAID Utility
● Hard disk drive monitoring
Maintenance Features
● Memory dump feature
● Hardware dump feature
● Event log correcting feature
Self-diagnosis
● Power On Self-Test (POST)
● System diagnosis utility (TeDoLi)
Power Saving Feature
●High efficiency power supply based on 80 PLUS®
GOLD
● Decrease running cost using advance save energy
control technology
Convenient Features
● Error device notification using BID (Built-In
Diagnostics)
● EXPRESSSCOPE® Monitor (LCD)
● Software power OFF
● Remote Power ON/OFF feature
● Consol less feature (Web consol)
Setup Utilities
● EXPRESSBUILDER
● BIOS Setup utility
To Next Page