Hardware
207
ID Button (Front)
EXPRESSSCOPE® Monitor and the ID LED on the rear side of the server light when pressing
the ID button with the ID LED being OFF. To release the LED from lighting, press the ID button
(front) or ID button (rear), or turn it off with operation on Web Console.
Navigation Button
“OK” button located in the center enables the following operations.
Move to Operation Menu
Determine each item in Operation Menu
“Up” button or “Down” button enables the following operations.
Move the cursor (arrow: mark) within Operation Menu
Change values in Operation Menu (when setting values such as an IP address)
“Left” button or “Right” button enables the following operations.
(move the cursor within Operation Menu (when setting values such as an IP address)
<OK Button>
<Up Button>
<Right Button>
<Left Button>
<Down Button>
Navigation Button
To Next Page
Loading...
