NEC Express 5800 - Error During POST

Hardware
163
Error during POST
An error message is displayed on the screen of the display device when an error is detected
during POST.
Error Messages Shown on the Display
The following shows the error message list, the causes, and the troubleshooting.
Example of Display Format
ERROR: Type:2; Severity:80; Class:0; Subclass:5; Operation: 800B
List of Causes/Troubleshooting corresponding the Codes
Type
Sever
-ity
Class
Sub-
class
Oper-
ation
Cause Troubleshooting
2 80 0 1 1006 Abnormal CPU temperature Replace the removed CPU.
2 80 0 1 1004 CPU BIST error Replace the removed CPU.
2 80 0 1 1003 Invalid CPU stepping Replace the removed CPU.
2 80 0 4 1008
NVRAMdeletion ended
abnormally
Replace IOM.
2 80 0 4 1009 Not detecting Memory Check if memory is mounted.
2 80 0 5 800D
IOH Initialization ended
abnormally
Replace the removed PMM.
2 80 0 5 800B Abnormal RTC battery Replace battery.
2 80 2 1 9
Detects insufficient resource
at PCI device check
Check if PCI device is
mounted.
2 80 3 2 1000
BIOS ended abnormally
(DXE Core not detected)
Update BIOS or replace the
removed CPU.
2 80 3 2 8000
BIOS ended abnormally (no
PPI for DXE loading)
Update BIOS or replace the
removed CPU.
2 80 3 3 8005
S3 Resume ended
abnormally (PPI not
detected)
Update BIOS or replace the
removed CPU.
2 80 3 3 8009
Recovery Failure (PPI
Undetected)
Update BIOS or replace the
removed CPU.
2 80 3 3 800B
S3 Resume ended
abnormally
Update BIOS or replace the
removed CPU.
2 80 3 3 800A Recovery Failure
Update BIOS or replace the
removed CPU.
2 80 3 3 8008 S3 Resume ended Update BIOS or replace the