56
Other
Operation Mode Default Option Setting Procedure
Serial Port Enable
• Set to enable/disable serial port
Enable
Enable,
Disable
BIOS SETUP
→ Advanced Menu
Serial Port Settings
• Set base address of serial port
and interruption
(If Auto is specified, BIOS
automatically sets.)
Auto
Auto,
etc…
BIOS SETUP
→ Advanced Menu
SR IOV Support
• Set to enable/disable Single Root
I/O Virtualization
Disable
Enable,
Disable
BIOS SETUP
→ Chipset Menu
Intel VT-d
• Set to enable/disable Intel®
Virtualization Technology for
Directed I/O
Enable
Enable,
Disable
BIOS SETUP
→ Chipset Menu
Disable USB Port
• Set to enable/disable USB port
(When [Front] is selected, USB
port on the front of the server
cannot be used. When [Rear] is
selected, USB on the rear of the
server cannot be used. When
[Front + Rear] is selected, both
USB ports on the front and rear of
the server cannot be used.
When [All] is selected, all the
USB ports cannot be used.
Note: When [All] is selected,
internal USB port becomes
disabled as well. When using
devices connected to the internal
USB port such as internal DVD
drive, virtual floppy drive, virtual
CD-ROM drive or remote KVM,
select other than [All].)
Disable
Disable,
Front,
Rear,
Internal,
Front+Rear, ···
BIOS SETUP
→ Advanced Menu
RTC Synch
• Set whether to synchronize the
date and time of Service
Processor (set by remote
console) with the system date
and time (set by BIOS)
(When Enable is set, the system
date and time is reflected in
Service Processor date and time
at OS booting. (Reflected only
when booted)
Enable
Enable,
Disable
BIOS SETUP
→Main Menu
To Next Page
Loading...
