Hardware
287
PCI Subsystem Settings
The following screen is displayed by selecting “PCI Subsystem Settings” in Advanced Menu.
Refer to the following table for the items.
Item Parameter Description
Pci Bus Driver Version
-
Display the PCI bus driver
version. (display only)
MMIOH [Disabled]
Enabled
Set Disable/Enable Memory
Mapped I/O Space,over 4GB
PERR# Generation Disabled
[Enabled]
Set Disable/Enable parity error
occurrence of PCI device.
SERR# Generation Disabled
[Enabled]
Set Disable/Enable system error
occurrence of PCI device.
I/O Space Skip List
[Enable]
Disable
Set Disable/Enable skipping I/O
space for the PCI slot in which
Intel Ether card is put.
If Enable, I/O space is not
assigned (SKIPPED) for the PCI
slot.
[ ]: Factory default
To Next Page
Loading...
