Operation and Maintenance
649
Command List
The following is the list of the command used on the system diagnosis. Refer to “Command
Reference” for the details of using each command ( = Available = Unavailable).
Command Description Idle Exec Wait
close Collapse the display under the specified device on the tree.
desel Unselect the test device from the test target.
exec Start test.
fail Display the test information of test ended with error.
help Display the command list.
info Display the detailed information of the test device.
list Display the test device list.
log Save the log of executed test.
open Expand the display under the specified device on the tree.
option Display the test ending condition.
pass Display the test information ended normally.
reboot Reboot the system.
round Set the number of times of test.
select Select the test device to be the test target.
shutdown Shutdown the system.
stat Display the test status of whole TeDoLi.
statv Display the detailed status of each test.
term End the currently-executed test forcibly.
time Set the test duration.
ver Display the version of the TeDoLi.
warn Display the test information of Warning status.
Idle status : Status before starting the test. Or the
status after
the completion of test.
Executing status : Status that the test is being executed.
Waiting for Termination
status
: Status that waiting for the completion of the test.
Command Supporting Function
Tab complement and history function is prepared as part of the command supporting function
of the system diagnostics.
■ Tab complements
Pressing the tab twice to enable this function. It lists all the available commands when no
command is entered. When a single character is already entered, commands sorted with the
entered character is displayed. If there is only one corresponding command, the sorted
command is displayed on the command line.
To Next Page
Loading...
