Hardware
289
TPM Configuration
The following screen is displayed by selecting “TPM Configuration” in Advanced Menu. It is
available only when the model supports TPM,Trusted Platform Module.
Refer to the following table for the items.
Item Parameter Description
TPM SUPPORT
(Note 1)(Note 4)
[Disable]
Enable
Set Disable/Enable for TPM
(Trusted Platform Module)
function.
TPM State
(Note 1)(Note 2)(Note 4)
[Disable]
Enable
Set Disable/Enable for TPM
operation
Pending TPM operation
(Note 3)(Note 5)
[None]
Enable Take Ownership
Disable Take Ownership
TPM Clear
Set Disable/Enable for the
schedule of TPM operation.
This specify the command
which will be issued at next
boot
TPM Enabled Status - Display the setting for TPM
function (display only)
To Next Page
Loading...
