NEC Express 5800 - Page 290

Hardware
290
TPM Active Status - Display the activation status
for TPM (display only)
TPM Owner Status - Display the ownership for
TPM (display only)
[ ]: Factory default
(Note 1) The parameter is selectable when Administrator privilege exists
(Note 2) The parameter is selectable when “TPM SUPPORT “ is set to “Enable”
(Note 3) The parameter is selectable when “TPM State“ is set to “Enable”
(Note 4) The parameter cannot be set to “Disable” when “Intel(R) TXT“ parameter in Intel(R) TXT
Configuration menu is set to “Enabled”
(Note 5) The parameter cannot be set to “TPM Clear” when “Intel(R) TXT“ parameter in Intel(R) TXT
Configuration menu is set to “Enabled”