NEC Express 5800 - Desel

Operation and Maintenance
683
desel
Function:
This command excludes devices specified by argument as test target.
Argument:
cmd arg Description
desel x
Sets specified device number to be excluded from test target.
When devices exist under the specified device, they are also
excluded from test target.
x :Test device number
Multiple device numbers can be specified (desel x1 x2 x3 ···).
Type
Sets specified device type to be excluded from test target.
Type :Test device type
Multiple device types can be specified (desel type1 type2 ···).
all
Sets all the device to be excluded from test target.
(Screen image)
Description
number
+----+-+---------------------------------+------------+----+-------------+
| Num|*| Device List | Type |Prev| Status |
+----+-+---------------------------------+------------+----+-------------+
：
| 4|!|-MGM2 |MODULE | | |
| 5|!| -MGM2/MGB/GbE |NIC | | |
| 6|*| Port1(eth1) |ETH-PORT | | |
| 7|*| Port2(eth2) |ETH-PORT | | |
：
TeDoLi> desel 5 <ENTER>
TeDoLi> list <ENTER>
+----+-+---------------------------------+------------+----+-------------+
| Num|*| Device List | Type |Prev| Status |
+----+-+---------------------------------+------------+----+-------------+
：
| 4|!|-MGM2 |MODULE | | |
| 5|!| -MGM2/MGB/GbE |NIC | | |
| 6| | Port1(eth1) |ETH-PORT | | |
| 7| | Port2(eth2) |ETH-PORT | | |
：