Operation and Maintenance
661
Ending TeDoLi
Use <shutdown> or <reboot> command to end the TeDoLi.
The following is an example of screen using the command.
• Only when the status of the TeDoLi is “Idle,” <shutdown> and <reboot> command are
available.
The status of TeDoLi can be checked with <stat> command.
• The system is rebooted with <reboot> command.
TeDoLi> shutdown
Are you sure you want to shut down the system?
Enter Y or N [N]: y
：
：
To Next Page
Loading...
Need help?
General