NEC Express 5800 - Fault Handling Related; Security Related

55
Fault Handling Related
Operation Mode Default Option Setting Procedure
Degraded Partition Boot Policy
• Set whether to boot the server with
degradation
Boot
Boot,
not Boot
Server Web Console
→ Settings
→ Mode Settings
Failing Unit Removal
• Set to remove failed unit
Disable failing
units
Enable failing units,
Disable failing units
Server Web Console
→ Settings
→ Mode Settings
Partition Boot Retry Times
• Set boot retry count
5 times 0 - 9 times
Server Web Console
→ Settings
→ Mode Settings
WHEA Support
• Set to enable/disable WHEA
(Windows Hardware Error
Architecture) function
Enabled
Enabled,
Disabled
BIOS SETUP
→ Advanced Menu
Processor Error Mode
• Set Processor Error Mode
LOM
LOM,
Poison,
Poison+Viral
BIOS SETUP
→ Advanced Menu
PERR# Generation
• Enable/Disable PCI device parity
error occurrence
Enable
Enable,
Disable
BIOS SETUP
→ Advanced Menu
SERR# Generation
• Enable/Disable PCI device system
error occurrence
Enable
Enable,
Disable
BIOS SETUP
→ Advanced Menu
Security Related
Operation Mode Default Option Setting Procedure
TPM SUPPORT
• Set to enable/disable TPM
function
Disable
Enable,
Disable
BIOS SETUP
→ Advanced Menu
TPM State
• Set to enable/disable TPM
operation
Disable
Enable,
Disable
BIOS SETUP
→ Advanced Menu
Pending TPM operation
• Schedule to TPM operation
None
Enable,
Enable Take Ownership,
Disable Take Ownership,
TPM Clear
BIOS SETUP
→ Advanced Menu
Intel(R) TXT
• Set to Enable/Disable Intel® TXT
function
Disabled
Enabled,
Disabled
BIOS SETUP
→ Advanced Menu