NEC Express 5800 - EFI Shell

Hardware
318
EFI Shell
EFI Shell is started by selecting “Build-in EFI Shell” of Boot Override in Save＆Exit Menu of
SETUP, or setting Boot Option #1 of Boot Menu to “Build-in EFI Shell” and rebooting the
system.
The following screen is displayed when starting EFI Shell.
Loading.: EFI Shell [Built-in]
EFI Shell version 2.00 [1.00]
Device mapping table
fs0 : Acpi(PNP0A03,2)/Pci(1F|0)/Pci(1|0)/Scsi(PunF,Lun0)/HD(Part1,Sig5433
fs1 : Acpi(PNP0A03,2)/Pci(1F|0)/Pci(1|1)/Scsi(PunF,Lun0)/HD(Part1,Sig5C58
blk0 : Acpi(PNP0A03,2)/Pci(1F|0)/Pci(1|0)/Scsi(PunF,Lun0)
blk1 : Acpi(PNP0A03,2)/Pci(1F|0)/Pci(1|0)/Scsi(PunF,Lun0)/HD(Part1,Sig5433
blk2 : Acpi(PNP0A03,2)/Pci(1F|0)/Pci(1|1)/Scsi(PunF,Lun0)
blk3 : Acpi(PNP0A03,2)/Pci(1F|0)/Pci(1|1)/Scsi(PunF,Lun0)/HD(Part1,Sig5C58
Shell>
Disk list
drive
recognized
by system
EFI shell prompt