527
If the authentication succeeded, SMASH-CLP is able to be used.
If it failed, the network is disconnected compulsory.
Simultanious Connection
Depending on the memory capacity of the management firmware, some connections to
SMASH-CLP are allowed.
Key Bind
The key bind , keyboard shortcut on the command line input, listed below are available.
Key Function
↑,CTRL+P Pick up the previous command from the history
↓,CTRL+N Pick up the next command from the history
<-,CTRL+B Move the Cursor to left
->,CTRL+F Move the Cursor to right
Enter Execute the command
CTRL+D Delete the character displayed below the Cursor
CTRL+A Move the Cursor to the head of the line
CTRL+E Move the Cursor to the end of the line
CTRL+K Delete all characters from the Cursor to the
end of the line.
TAB Add complementation for the keyword of the OEM
command
IMPORTANT:
•It is not possible to use the port number rather than 23 for the
SSH port number.
•The authentication method rather than “keyboard-interactive”
are not supported.
IMPORTANT:
•Less than 5 connections are recommended to avoid shorting
the memory of the management firmware.
To Next Page
Loading...
