538
Supported OEM Commands
General description
Below are the OEM commands which are supported.
・ o
emnecversion
・ Format
oemnecversion
・ Parameter
None
・ Description
Display the version of the managemen firmware and the BIOS.
“BMCFW” means the management firmware.
・ Example
Command Privilege Function
oemnecversion Operator Display the version of the management
firmware and the BIOS.
oemneclogin
Operator Do remote login to the other management board.
oemnecsol SOL Connect to the SOL of the partition(server)
oemnecreboot Administrator Reboot the management firmware
oemnecspdump OEM Do SP Dump
oemnecpasswd Operator Change the login password
oemnecfirewall Administrator Set the firewall of the network protocol
oemnectrusthost Administrator Restrict the network access to the management
firmware by the original IP address.
oemnecdate Operator Display the management firmware date and time.
oemnecforcedump Operator Execute ForceDump(Take clush dump)
oemnecdisconnect Administrator Network applications become disconnected.
BMCFW Revision : 0.0.3.5 ('SVN3510 test@example ')
BMCFW Build Time : Jan 19 2010 20:32:19
BIOS Revision : 1.00
BMCFW FLASHROM block layout:
To Next Page
Loading...
