NEC Express 5800 - Execute Menu

Hardware
244
Server Menu
Server Control Menu
Execute Menu
Move to the applicable Execute Menu by either of the operations below.
a. Select “SVRx Power Up >” or “SVRx OS Shutdown >” item in the Server Menu．Server
Control Menu status.
b. Select the item other than “Return” in the Server Menu．Server Control Menu．For
Maintenance Menu status.
(1) Server Number : Server Number [1] or [2] is displayed.
(2) Control Type :
 The items Power Up, OS Shutdown, Power Down, Hard Reset, Force Dump, Power Cycle
selected in the menu of “a” or “b” above are displayed for Control Type.
 Select “Up” or “Down” button to move within Execute Menu.
 The leftmost “ ” indicates the currently selected item.
 Press “OK” button to execute the menu item.
 When selecting “Execute,” the process of the selected items
Power Up, OS Shutdown, Power Down, Hard Reset, Force Dump, Power Cycle is
performed.
 Select and execute “Return” to return to top Menu.
(1)
S
V R
1
OS
Sh
utd
ow
n
E
x e c
u t
e
R
e t u
r n
(2)
IMPORTANT:
Don’t shut down OS until the OS boot is finished after starting
power on. If OS boot is finished, then the “Server Operating State”
on EXPRESSSCOPE®
Monitor/Server Menu/
View Information Screen will be “OS running/EFI Manager Booted”.