NEC Express 5800 - SYS Network Menu

Hardware
225
System Menu
SYS Network Menu
When LCD Guard Mode is set to “Disable,” the screen moves to Network Menu by selecting
and executing “SYS Network>” in the System Menu status.
 Select “Up” or “Down” button to move within the Network Menu.
 The leftmost “ ” indicates the currently selected item.
 Press “OK” to execute the menu item.
 When selecting “Return,” it returns to System Menu.
・When selecting ”View Information”, the current network information(DHCP enabling, IP address,
subnet mask and default gateway) print.
・When selecting ”Set DHCP On”, new network address will retrieve by using DHCP protocol.
However, the network address will be zero when the network communication fails. When DHCP lease
is not updated after a network address retrieves, the network address will be zero.
・When selecting ”Set IP Addr”, the static IP address can be configured. If DHCP is already
enabled,the DHCP will be disabled.
・When selecting ”Set IP Mask”, the static IP address can be configured. If DHCP is already
enabled,the DHCP will be disabled.
・When selecting ”Set Gateway Add”, the static IP address can be configured. If DHCP is already
S
Y S
N e t
wo
rk
V
i e w
I
n f o
rm
at i
on
↓
R e
r
t
S
e t
D H C
P
On
S
e t
I P
A d
dr
S
e
t
I
P M
a
sk
S
e
t
G a
t e w
a
y
Ad
dr
↑
V
i
e w
D
H
C P
G
u
ID
n
U