Hardware
74
Hardware
This chapter describes hardware of the server.
“Names and Functions of Components” (page 76)
This section describes names and functions for each part of the server.
“Installation and Connection” (page 121)
This section describes a location suitable for installing the server, how to
mount the server on mounting a rack mount chassis, and how to connect
connecters.
“Basic Operation” (page 159)
Describes how to turn ON/OFF the power and handle DVDs, etc.
“Upgrading Your Server” (page 174)
Refer to this section when mounting options on the server.
“NEC EXPRESSSCOPE®
Monitor” (page 204)
Enables a user to turn ON/OFF power of the server, to check the system
information and status, and to set various networks.
“BIOS Setup” (page 277)
Describes how to set BIOS using the dedicated utility.
“RAID System Configuration” (page 321)
Describes how to use internal hard disk drives as a RAID system with using
Internal RAID controller(NE3104-001/003) .
Hardware
NEC Express5800 Series
Express5800/A1080a-S, A1080a-D, A1080a-E
Express5800/A1040a
To Next Page
Loading...
