Hardware
206
IMPORTANT*
● If no operation is performed for a certain period of time (30
seconds) on EXPRESSSCOPE®
Monitor of LCD, the sleep
function is activated and screen display and backlight are
turned off.
When starting the operation again from the off state, press any
button to display the screen again.
● Main EXPRESSSCOPE® Monitor screen information is not
updated automatically. Information is updated at the timing of
switching the screen with the button operation.
● Server Health State may not be displayed immediately after the
management module is booted. It can be displayed properly by
switching the screen with the button operation and by updating
information.
To Next Page
Loading...
