NEC Express 5800 - Page 468

468
(16)-2 “User Name”
Usable ASCII character code Number of settable characters
 alphabetic character
 alphanumeric character
 “_”, “-“
16
(16)-3 “Password”Usable ASCII
character code
Number of settable characters
 alphabetic character
 alphanumeric character
 symbols(Except the space character)
20
(17) Set the sender address to “From Address”
Usable ASCII character code and Number of settable characters are same as (9).
(18) Set encryption method for Email contents.
(18)-1 Select encryption method from “Encryption Method.”
Selection Options
 Local Encryption
 AES Encryption
(18)-2 “Password”
Enter password in 4 or more or 16 or less one-byte alphanumeric characters and
symbols when AES Encryption is selected in (18)-1.
Usable ASCII character code and Number of settable characters are same as (16)-3 .
(19)-1 “Mail Server (POP)IP”
This function is unavailable.
(19)-2 “User Name”
This function is unavailable.
(19)-3 “Password”
This function is unavailable.
(20)-1 Clicking “Submit” enables to set the information of (14) ~ (19) and move to the initial
screen of Alert Management.
(20)-2 Clicking “Cancel” enables to move to the initial screen of Alert Management.
IMPORTANT:
 The alert mail might not be able to be used depending on the
network configuration and the SMTP server setting.