Hardware
171
5. Push the front of the tray lightly to retract it into the drive.
To take ouot the media from the DVD drive,
press the tray button in the similar way in setting
the CD/DVD-ROM to make the tray go out.
If access lump is lit in green, the CD/DVD-ROM
is being accessed. Comfirm that the access lump
is not lit before pressing the tray eject button.
While pushing the rotor at the center of the tray,
hold the end of the disk lightly and take the disk
out from the tray. After taking the CD/DVD-ROM,
return the tray into the drive.
IMPORTANT:
If a noisy sound in driving the DVD
drive occurs after setting a
CD/DVD-ROM, set it again correctly.
To Next Page
Loading...
