NEC Express 5800 - Page 297

Hardware
297
Technology(Intel® TXT)
function.
Intel(R) VT-d
(Note 2) (Note 6)
Disabled
[Enabled]
Set Disable/Enable for Intel®
Virtualization Technology for
Directed I/O function.
Intel(R) VT
(Note 3) (Note 6)
Disabled
[Enabled]
Set Disable/Enable for Intel®
Virtualization Technology
function.
TPM Support
(Note 4) (Note 6)
[Disable]
Enable
Set Disable/Enable for TPM
(Trusted Platform Module)
function.
TPM State
(Note 5)(Note 6)
[Disabled]
Enabled
Set Disable/Enable for TPM
operation
[ ]: Factory default
(Note 1) The parameter is selectable when “Intel(R) VT-d”, “Intel(R) VT”, “TPM Support” and “TPM
State“ are set to “Enabled”
(Note 2) The parameter is same as “Intel VT” parameter in CPU Configuration menu. When this
parameter is changed in this screen, the parameter in CPU Configuration menu will be
changed.
(Note 3) The parameter is same as “Intel(R) VT-d” parameter in Intel(R) VT for Directed I/O
Configuration menu. When this parameter is changed in this screen, the parameter in
Intel(R) VT for Directed I/O Configuration menu will be changed.
(Note 4) The parameter is same as “TPM SUPPORT” parameter in TPM Configuration menu. When
this parameter is changed in this screen, the parameter in TPM Configuration menu will be
changed.
(Note 5) The parameter is same as “TPM State” parameter in TPM Configuration menu. When this
parameter is changed in this screen, the parameter in TPM Configuration menu will be
changed.
(Note 6) The parameter cannot be set to “Disabled” when “Intel(R) TXT“ is set to “Enabled”.