406
(5) Power Capping technology
Property
Description
Default
setting
Power Capping technology
Enable or disable “Power Capping Technology”.
⁃ Disable : Enable “Power Capping Technology”
⁃ Enable : Disable “Power Capping Technology”
⁃ Upper Limit :
An operator can set the upper limit of the
power consumption If the Power Capping
Control is enabled.
There is case that system consumption will be
suppressed with this value.
Please note that system performance may
decrease in that case.
And The warning message may appear in (6)
reagion with following case.
If the Upper Limit value falls below the
Controllable setting range(dynamic value)
If specified value is invalid(except from 1
to 65535)
Controllable setting range :
This is range which need to manage
power control. This is fluctuating value
with system configuration.
Current Power Consumption :
This is current power consumption value
in system. This will be updated at regular
intervals.
Max Power Consumption :
This is theoretical value which are
calculated with full configuration system.
Disable,
Upper Limit :0
Controllable
setting range
Current Power Consumption
Max Power Consumption
Upper Limit
To Next Page
Loading...
