419
Entry,” the selected alert information is deleted.
Modify Alerts screen
Set alert information.
(6) Select alert type in “Alert Type.”
Selection Options
SNMP Trap
Email
(7) Select alert level in “Event Severity.”
(8) Set IP address in “Destination IP.”
IP address can be set when alert type is SNMP Trap.
Set the address in dot-decimal notation to IP address.
Dot-decimal notation: xxx.xxx.xxx.xxx (0-255)
Alert Level Description
Low Disable All Alert notification is disabled.
Information Send the notification of higher severity than the
Information level in the system.
Warning Send the notification of higher severity than the
Warning level in the system.
Critical Send the notification of higher severity than the
Non-recoverable level in the system.
Hight
Non-recoverable Send the notification of higher severity than
Non-recoverable level in the system.
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)