434
Status : Resource operation status
Display (value) Description
Stopped Stopped.
BIST Running BIST Running status.
Initializing Boot-up (mounting) in progress status
Initialized Boot-up (mounting) completed status
Running Running status
Stopping Shutdown (mounting) in progress status
(3) Execution buttons
Power ON : Power on server
Power OFF immediate : Shut down server forcibly
Soft Shutdown : Execute OS gracefully shutdown
Hard Reset
8
: Execute hard reset
Power Cycle
9
: Execute power cycle
Force Dump : Execute force dump
Remote KVMs : Move to remote console function start screen
8
Same means as “cold reset”. Cold reset includes hardware initialization.
9
After shutdown the server, the server will be powered up.
IMPORTANT:
About the timing for AC power off
Before turning AC power off, please confirm that the following
conditions are true and the PSU status lamp of each power unit is
blinking one minute later.
The System Power lamp of EXPRESSSCOPE® Monitor is
off.
The POWER LED of virtual LCD for all servers are off.
All resource units are powered off.
About ”Power On", "Power Off-Immediate" operation
If "Power On" operation starts, information about power
and status will be updated after 110 seconds.
If "Power Off-Immediate" operation starts, information
about power and status will be updated after 260 seconds.
To Next Page
Loading...
