NEC Express 5800 - Page 453

453
(1) Clicking “Submit” enables to set the information of (3) ~ (10).
(2) Clicking “Default Select” enables to restore the operation mode to the status before
selecting operation.
(3) Configuration
Display/set setting information related to configuration.
Property
Description
Default
setting
Clear SG information of BIOS
Specify whether to clear the BIOS data.
⁃ Enable : Clear the configuration data that
BIOS has.
⁃ Disable : Not clear the configuration data that
BIOS has.
Disable
(4) OS
Display/set setting information related to OS.
Property
Description
Default
setting
Memory addressing size
Specify OS’s memory addressing mode.
- 44 bit mode : 44 bits addressing mode
- 40 bit mode : 40 bits addressing mode
44 bit mode
(5) Boot
Display/set setting information related to boot.
(9)
(10)
(11)