455
setup. So, it is recommended that NUMA is set
to “disable” on BIOS when using the memory
interleaving among multiple processors. Refer
to the “Chipset” of “BIOS Setup” section for
details on NUMA.
Memory Channel Selection
Specify the type of memory channel.
⁃ Quad : memory access per each 4 channels
If A1080a-S,A1080-D or A1040a, this is
required.
⁃ Dual : memory access per each 2 channels
Quad
Patrol Scrubbing
13
Enable or disable memory scrbing.
⁃ Enable : enable memory scrbing
⁃ Disable : disable memory scrbing
Enable
(7) I/O
Display/ set setting information related to I/O.
Property Description
Default
setting
Wake On LAN
Enable or disable Wake On LAN(WOL).
⁃ Enable : Enable Wake On LAN
⁃ Disable : Disable Wake On LAN
Enable
13
As for more details, refer "Memory RAS Functions - Memory Scrubbing"
IMPORTANT:
Please enable WOL settings when the server is power off. After
that, please power on the server using WOL functionality.
To Next Page
Loading...
